The first page of this article is displayed as the abstract.

To cope with the urgent environmental pressure and tight energy demand, using electrocatalytic methods to drive the reduction of carbon dioxide molecules and produce a variety of fuels and chemicals, is one of the effective pathways to achieve carbon neutrality. In recent years, many significant advances in the study of the electrochemical carbon dioxide reduction reaction (CO2RR) have been made, but most of the works exhibit low current density, small electrode area and poor long-term stability, which are not suitable for large-scale industrial applications. Herein, combining the research achievements obtained in laboratories and the practical demand of industrial production, we summarize recent frontier progress in the field of the electrochemical CO2RR, including the fundamentals of catalytic reactions, catalyst design and preparation, and the construction of electrolyzers. In addition, we discuss the bottleneck problem of industrial CO2 electrolysis, and further present the prospect of the essential issues to be solved by the available technology for industrial electrolysis. This review can provide some basic understanding and knowledge accumulation for the development and practical application of electrochemical CO2RR technology.

The properties of functional materials based on organic π-conjugated systems are governed extensively by intermolecular interactions between π-molecules. To establish clear relationships between supramolecular structures and functional properties, it is essential to attain structurally well-defined π-stacks, particularly in solution, as this enables the collection of valuable spectroscopic data. However, precise control and fine-tuning of π-stacks pose significant challenges due to the weak and bidirectional nature of π–π stacking interactions. This article introduces the concept of “frustrated π-stacking,” strategically balancing attractive (π–π interaction) and repulsive (steric hindrance) forces in self-assembly to exert control over the sizes, sequences of π-stacks, and slip-stacked structures. These research efforts contribute to a deeper understanding of the correlation between π-stacks and their properties, thereby providing useful insights for the development of molecular materials with the desired performance.

Lignin is an aromatic heteropolymer, found in plant cell walls as 20–30% of lignocellulose. It represents the most abundant source of renewable aromatic carbon in the biosphere, hence, if it could be depolymerised efficiently, then it would be a highly valuable source of renewable aromatic chemicals. However, lignin presents a number of difficulties for biocatalytic or chemocatalytic breakdown. Research over the last 10 years has led to the identification of new bacterial enzymes for lignin degradation, and the use of metabolic engineering to generate useful bioproducts from microbial lignin degradation. The aim of this article is to discuss the chemical mechanisms used by lignin-degrading enzymes and microbes to break down lignin, and to describe current methods for generating aromatic bioproducts from lignin using enzymes and engineered microbes.

Electrocatalytic and photocatalytic CO2 reduction by a heterobimetallic Cu/Fe–Mabiq complex were examined and compared to the monometallic [Fe(Mabiq)]+. The neighbouring Cu–Xantphos unit leads to marked changes in the electrocatalytic mechanism and enhanced photocatalytic performance.

Dielectric spectroscopy has been used to determine the barriers of rotation of surface-mounted fullerenes (2.3 ± 0.1 and 4.3 ± 0.1 kcal mol−1). In order to achieve this, a C60 derivative equipped with an anchoring group designed to form a surface inclusion with the hexagonal form of tris(o-phenylenedioxy)cyclotriphosphazene (TPP) has been synthesized. Solid-state NMR analysis revealed that approximately 50% of the surface-mounted molecules have a chemical environment different from the others suggesting two distinct insertion modes. These observations correlate with results of DFT calculations.

PdPtP nanodendrites were prepared by a post-phosphating method. Due to their well-designed structure and composition, the EOR activity of the PtPdP NDs is significantly increased to 14.3 A mgPd+Pt−1, which is a significant improvement compared to commercial Pd/C catalysts. In addition, stability tests demonstrated their excellent catalytic activity and structural durability.

Replacing one of the peripheral Se with a Se2 bridge is an effective strategy to flatten the C4v CB4Se4 cluster. The global minimum of CB4Se5 contains one fan-shaped planar tetracoordinate carbon (ptC) CB4 core, possessing double 2π + 6σ aromaticity. The peripheral Se2 bridge is dexterous and crucial for the stability of CB4Se5.

A graphical abstract is available for this content

Multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters have become an active research topic at the forefront of organic light-emitting diodes (OLEDs) owing to their excellent photophysical properties such as high efficiency and narrow emission characteristics. However, MR-TADF materials always exhibit slow reverse intersystem crossing rates (kRISC) due to the large energy gap and small spin–orbit coupling values between singlet and triplet excited states. In order to optimize the RISC process, strategies such as heavy-atom-integration, metal perturbation, π-conjugation extension and peripheral decoration of donor/acceptor units have been proposed to construct efficient MR-TADF materials for high-performance OLEDs. This article provides an overview of the recent progress in MR-TADF emitters with an efficient RISC process, focusing on the structure–activity relationship between the molecular structure, optoelectronic feature, and OLED performance. Finally, the potential challenges and future prospects of MR-TADF materials are discussed to gain a more comprehensive understanding of the opportunities for efficient narrowband OLEDs.

We found that under oxidative stress conditions, the coexistence of human telomeric DNA (HT-DNA) and a copper-terpyridine metallodrug can accelerate dopamine oxidation. The unwinding of HT-DNA from a duplex to cytosine-rich (C-rich) and guanine-rich (G-rich) single strands promotes dopamine oxidation in a general order of C-rich > G-rich > duplex. Along with dopamine oxidation, HT-DNA also undergoes severe damage.

Cervical cancer is the second most harmful cancer to women, while human papillomavirus (HPV)-16 is the main cause of cervical cancer. Early virus screening can reduce the risk of death, but is sometimes challenged by the low concentration and complicated matrix in physiological samples such as human serum. Herein, we report a CRISPR-Cas12a-enhanced mass spectrometric 3D DNA nanomachine for HPV-16 detection in human serum. Thanks to the high sensitivity of the CRISPR-Cas12a-enhanced 3D DNA nanomachine, and the high matrix-tolerance of elemental mass spectrometry, the proposed method was successfully applied for direct human serum analysis with a low detection limit of 1.2 pM.

Dithienoacenes with a heptacene core, heptaceno[2,3-b:11,12-b′]bis[1]benzothiophene, have been synthesized through the combination of solution and surface assisted chemistry. The atomic composition, structural arrangement and electronic properties of the molecules on the Au(111) surface have been deeply explored by non-contact atomic force microscopy (nc-AFM), bond-resolved scanning tunnelling microscopy (BR-STM) and scanning tunneling spectroscopy (STS) corroborated by density functional theory (DFT) calculations. Our combined experiments reveal modifications induced by sulfur substitution.

Herein, we present the first application of target-directed dynamic combinatorial chemistry (tdDCC) to the whole complex of the highly dynamic transmembrane, energy-coupling factor (ECF) transporter ECF-PanT in Streptococcus pneumoniae. In addition, we successfully employed the tdDCC technique as a hit-identification and -optimization strategy that led to the identification of optimized ECF inhibitors with improved activity. We characterized the best compounds regarding cytotoxicity and performed computational modeling studies on the crystal structure of ECF-PanT to rationalize their binding mode. Notably, docking studies showed that the acylhydrazone linker is able to maintain the crucial interactions.

The reaction of a pyridyl-substituted, doubly Lewis base-stabilised diborene with different amounts of copper(I) precursors led to the formation of the first chelating π-diborene complexes, the first π-diborene complexes in which metals are bound to both faces of the BB bond, and the first mixed-metal π-diborene species.

Zn metal anodes in aqueous batteries experience inhomogeneous deposition and corrosion issues. Herein, we introduced, at a low concentration, dioxane (DX) as an electrolyte additive to stabilize a Zn anode. The oxygen sites of DX endowed it with a strong affinity for Zn and Zn2+, resulting in its adsorption onto the Zn electrode surface and its coordination with Zn2+ locally. The Zn2+-DX species exhibited a decreased lowest unoccupied molecular orbital energy level relative to those of water-involved components. The DX additive not only inhibited side reactions but also generated a stable solid–electrolyte interphase on the Zn electrode, ensuring a uniform Zn deposition. As a result of including the additive, the cycle life of the Zn symmetric cell was extended from 99 h to 2100 h, and the coulombic efficiency in Zn//Cu cell reached 99.5%.

Herein, we developed a synthetic strategy for the direct construction of C–S bonds to obtain biologically active sulfur-containing compounds and a methodology involving the reductive sulfuration of aldehydes or ketones to obtain diverse substituted thiol, disulfide, and thioester derivatives. EtOCS2K is demonstrated as a potential substitute for the Berzelius reagent or Lawesson's reagent for the construction of C–S bonds.

The reaction between Th(IV) dipyriamethyrin dichloride and sodium cyclopentadienyl (Cp) results in the formation of a cyclopentadienyl capped thorium dipyriamethyrin complex, which to our knowledge represents the first expanded porphyrin f-element Cp complex.

Dehydrogenation of ammonia borane to well-defined products is an important but challenging reaction. A dinuclear ruthenium complex with a Ru–Ru bond bearing a diazadiene (dad) unit and olefins as non-innocent ligands catalyzes the highly selective formation of conjugated polycondensed borazine oligomers (BxNxHy), predominantly B21N21H18, the BN analogue of superbenzene.

Single-atom catalysts (SACs), distinguished by their exceptional atomic efficiency and modifiable coordination structures, find wide-ranging applicability, notably in the context of the hydrogen evolution reaction (HER). Herein, we synthesized a Ti3C2Tx-based Ni single-atom catalyst (Ni SA@N-Ti3C2Tx) by immersing a single Ni atom into the Ti vacancies of Ti3C2Tx and using a N-doping strategy. X-Ray adsorption fine structure revealed the formation of local Ni-N1C1 and an unsaturated C–Ni–N bridge configuration for isolated Ni species. Moreover, Ni SA@N-Ti3C2Tx exhibited an excellent HER performance with an overpotential of 63 mV at 10 mV cm−2. This work could enable use of MXene-based SACs in the HER.